QMS 1060E, Operation

Page: 63 / 116

Clearing Media
Jams
6-3 Troubleshooting
Print media jams can occur in any of the following areas:
n
Inside upper unit
n
Standard or optional cassette unit
n
Multipurpose tray
n
Output tray
Jams can occur in more than one location at a time, so be sure to
check all these locations.
» Note: After clearing the jam, always open and close the top cover
once before printing. Printing will not resume until you do this.
When printing from a cassette, check for the media jam in the cas-
sette area.
When printing from the multipurpose tray, check for the media jam
in the multipurpose tray area
Clearing Inside Upper Unit Area Jams
M
WARNING! The fixing assembly and print delivery guide become
extremely hot when the printer is used. Personal injury could result if
you touch those areas.
ACHTUNG! Die Fixiereinheit und die Papierführung werden sehr
heiß, wenn der Drucker in Betrieb ist; bei Berührung dieser Partien
besteht Verletzungsgefahr!
1 Open the printer’s top cover.
2 Raise the roller release plastic sheet and remove the jam
from the upper unit as follows: