QMS 1060E, Operation

Page: 78 / 116

Output
Problems
QMS 1060E Print System Operation 6-18
n
Administration/Communications/LocalTalk (if installed)
Ethernet Interface Printing Problem
If you have trouble connecting and configuring your Ethernet inter-
face, check the following:
n
Is the printer connected to the network?
n
Is the printer plugged in, turned on, and correctly configured?
n
Do the printer start-up and status pages list the interface? Is the
configuration information correct?
n
Is the interface enabled?
n
Is the appropriate protocol (or protocols) enabled?
n
Are all printer and protocol addresses configured correctly?
Blank Page
n
If a blank start-up page ejects or blank pages come out during a
printing job, check for an empty, absent, or defective toner car-
tridge.
» Note:
Remember that there is no automatic notification if the
toner cartridge is not installed in the QMS 1060E Print System, so
you need to manually check to make sure the cartridge is
installed.
n
Make sure you have broken the tab on the side of the toner car-
tridge and removed the sealing tape.
n
Check to ensure that you are not using perforated paper or 3-hole
punched paper. This type paper is not recommended for your
printer.