QMS 1060E, Operation

Page: 30 / 116

About Toner
Cartridges
QMS 1060E Print System Operation 2-18
Printing on Thick Paper or Card Stock
Load this media in the multipurpose tray the same as specified for
other media in the “Loading the 500-sheet Cassette” and “Loading
the Multipurpose Tray” sections, earlier in this chapter, with the follow-
ing exceptions:
n
Adjust the multipurpose tray guides to fit the label size. Also,
make sure the media size and type meet specifications listed in
appendix B, “Technical Specifications,” of the
Reference
.
n
Insert the media short edge first with the printing surface face up.
About Toner Cartridges
In your laser printer, characters and images are created through a
process that applies toner (made of carbon particles) to the page in
the printer’s fusing unit. When an image is formed a positive electrical
charge is applied to transfer the image to the page. The toner car-
tridge contains the toner and the photosensitive drum needed to
operate the laser printer.
Installing and Storing the Toner Cartridge
Installing
The cartridge is sensitive to bright light. Do not remove the toner car-
tridge from its protective bag until you’re ready to install it.
To install a new toner cartridge, either follow the instructions written
on the toner cartridge or the instructions in the “Installing a New Toner
Cartridge” section later in this chapter.
Storing
The cartridge should be
n
Kept level during storage. Do not stand or store the cartridge on
its end.