QMS 1060E, Operation

Page: 34 / 116

About Toner
Cartridges
QMS 1060E Print System Operation 2-22
Installing a New Toner Cartridge
▲
Caution
: Toner cartridges are sensitive to bright light. Do not remove
the new toner cartridge from its protective bag until you’re ready to
install it. Store the cartridge in an environment that is not subject to
extreme heat or humidity. Keep the toner cartridge away from your
computer. The magnets in the cartridge can damage data, particularly
on your floppy disks.
M
WARNING! The fixing assembly and print delivery guide areas
become extremely hot when the printer is used. Personal injury could
result if you touch those areas when opening the top cover or
installing the toner cartridge.
ACHTUNG! Sowohl die Fixiereinheit als auch die Papierführung
werden im Druckbetrieb extrem heiß. Um Verletzungen zu
vermeiden, sollten diese Druckerpartien, z.B. wenn Sie eine neue
Tonerkartusche einlegen, nicht berührt werden!
Use the following procedure to install a new toner cartridge:
1 Lift the toner cartridge out of its shipping carton, open the
aluminum protective bag, and remove the cartridge.
After taking the toner cartridge from its protective bag, do not
open the cover or touch the PC drum of the toner cartridge
because doing so may deteriorate the drum and reduce print
quality.
2 Remove the tape seal.
Holding the cartridge in place with your right hand, use your left
hand to grasp the green tab on the left side of the toner cartridge.
Pull the tab straight out (it is about 22"/539 mm long). If the tab