QMS 1060E, Operation

Page: 70 / 116

Service
Messages
QMS 1060E Print System Operation 6-10
Service Messages
The following service messages may appear in the message window:
» Note: A service message sometimes occurs as a result of an unusual
combination of events, not because of an actual problem. When the
printer stops and a service message displays in the message window,
turn the printer off and then back on. This often clears the service
message indicator, and printer operation resumes. Always try this
before making a service call.
Service calls should be placed to the vendor from whom you pur-
chased the printer. If you cannot get service from your vendor, see
appendix A, “QMS Customer Support,” for more information.
» Note: Shaded table cells indicate that the message scrolls.
CALL FOR SERVICE ENGINE ERROR 1 Indicates that an error has
been detected with the Fuser
Unit. Contact your QMS
vendor.
CALL FOR SERVICE ENGINE ERROR 11 Indicates that an error has
been detected with the
Scanner Motor. Contact your
QMS vendor.
CALL FOR SERVICE ENGINE ERROR 12 Indicates that an error has
been detected with the Fan
Motor. Contact your QMS
vendor.
CALL FOR SERVICE ENGINE ERROR 20 Indicates that an error has
been detected with the Beam.
Contact your QMS vendor.