QMS 1060E, Operation

Page: 18 / 116

Loading the
500-Sheet
Cassette
QMS 1060E Print System Operation 2-6
4 Take off the top and bottom sheets.
The top and bottom sheets sometimes have residual glue buildup
that could cause the printer to jam.
5 Position the cassette.
The cassette has a spring in the bottom that provides some resis-
tance when print media is placed on it. Lay the cassette flat on a
hard surface and using your left hand push down on the plate in
the cassette until it locks.
6 Load the media in the cassette.
Load the media so the edge of the stack comes against the back
of the cassette in three steps as follows:
Remove Top Sheet
Remove Bottom Sheet