Promise Technology VTRAK 15100 User Manual Download Page 93

Page: 93 / 192

Chapter 4: Management with WebPAM PRO

Logical Drive Management

Create a Logical Drive

You must have Creation Rights to perform this function.

Click on the Logical Drive View

icon. The Logical Drive View Window

appears.

Click on the Create/Delete logical drive menu and select Create logical drive.
The Create Logical Drive screen will display.

In the Logical Drive Name field, type in a name for your logical drive.

In the RAID Level drop-down menu, select the type of RAID you want. The
available choices will vary depending on which Promise product you have.

•

Create a Logical Drive (below)

•

Migrate a Logical Drive (page 93)

•

Logical Drive LUN Setting (page 86)

•

Synchronize a Logical Drive (page 95)

•

Logical Drive Functions (page 88)

•

Synchronization Schedule (page 96)

•

Logical Drive Critical Status (page 90) •

Delete a Logical Drive (page 98)

•

Rebuild a Logical Drive (page 92)

Summary of Contents for VTRAK 15100

































































































































































































Search results

Summary of Contents for VTRAK 15100

Reviews:

Related manuals for VTRAK 15100

Brands by name

Popular brands

Promise Technology VTRAK 15100, User Manual

Search results

Summary of Contents for VTRAK 15100

Reviews:

Related manuals for VTRAK 15100

Brands by name

Popular brands