ProCurve 3500yl Series, Management And Configuration Manual, Page: 274 / 732

11-24
Power Over Ethernet (PoE) Operation
Viewing PoE Configuration and Status
Viewing PoE Configuration and Status
Displaying the Switch’s Global PoE Power Status
For example,
show power-over-ethernet
displays data similar to that in figure
11-6.
Syntax: s how power-over-ethernet [brief | [ethernet] <port-list> |[slot
<slot-id-range> | all>]]
Displays the switch’s global PoE power status, including:
• Total Provided Power: Lists the maximum PoE wattage available
to provision active PoE ports on the switch. This is the amount
of usable power for PDs.
•
Total Failover Power:
Lists the amount of PoE power available
in the event of a single power supply failure.This is the amount
of power the switch can maintain without dropping any PDs.
•
Total Redundancy Power:
Indicates the amount of PoE power that
is held in reserve for redundancy in case of a power supply
failure.
•
Total Allocated Power
: The amount of power used by PDs.
brief:
Displays PoE information for each port. See “Displaying PoE
Status on All Ports” on page 11-26.
<port-list>:
Displays PoE information for the ports in <port-list>.
See “Displaying the PoE Status on Specific Ports” on page 11-28.
<slot-id-range>:
Displays PoE information for the selected slots.
(See figure 11-8). Enter the
all
option to display the PoE
information for all slots.
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 24 Monday, January 28, 2008 10:04 AM