10-20
Port Status and Configuration
Using Friendly (Optional) Port Names
Configuring the Same Name for Multiple Ports.
Suppose that you want
to use ports A5 through A8 as a trunked link to a server used by a drafting
group. In this case you might configure ports A5 through A8 with the name
“Draft-Server:Trunk”.
Figure 10-14. Example of Configuring One Friendly Port Name on Multiple Ports
Displaying Friendly Port Names with Other Port Data
You can display friendly port name data in the following combinations:
■
show name
: Displays a listing of port numbers with their corresponding
friendly port names and also quickly shows you which ports do not have
friendly name assignments. (
show name
data comes from the running-
config file.)
■
show interface <
port-number
>
: Displays the friendly port name, if any, along
with the traffic statistics for that port. (The friendly port name data comes
from the running-config file.)
■
show config
: Includes friendly port names in the per-port data of the
resulting configuration listing. (
show config
data comes from the startup-
config file.)
To List All Ports or Selected Ports with Their Friendly Port Names.
This command lists names assigned to a specific port.
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 20 Monday, January 28, 2008 10:04 AM