B-67
Monitoring and Analyzing Switch Operation
Traffic Mirroring
Viewing Mirroring in the Current Configuration File
Using the
show run
command, you can view the current mirroring configura-
tion on the switch.
Source mirroring session entries begin with the
mirror
keyword and the
mirroring sources are listed per-interface. For example:
Figure B-29. Example of Using the Configuration File to View the Source Mirroring Configuration
Destination mirroring session entries begin with
mirror endpoint
. In the follow-
ing example, two sessions are using the same exit port:
Figure B-30. Example of Using the Configuration File to View the Source Mirroring Configuration
ProCurve(config)# show run
Running configuration:
; J8697A Configuration Editor; Created on release #K.12.XX
max-vlans 300
ip access-list extended "100"
10 permit icmp 0.0.0.0 255.255.255.255 0.0.0.0 255.255.255.255 0
exit
no ip address
exit
. . .
mirror 1 port B3
mirror 2 name "test-10" remote ip 10.10.10.1 8010 10.10.30.2
. . .
interface B1
monitor ip access-group "100" In mirror 1
monitor all Both mirror 2
exit
. . .
Configured Source Mirroring Sessions
Configured Mirroring Sources
ProCurve(config)# show run
Running configuration:
; J8693A Configuration Editor; Created on release #K.12.XX
module 3 type J8694A
. . .
mirror endpoint ip 10.10.20.1 8010 10.10.30.2 port 4
mirror endpoint ip 10.10.51.10 7955 10.10.30.2 port 4
. . .
Configured Destination Mirroring Sessions
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 67 Monday, January 28, 2008 10:04 AM