manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 350 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 350

13-32

Port Traffic Controls     

Jumbo Frames

Enabling or Disabling Jumbo Traffic on a VLAN

Configuring a Maximum Frame Size

You can globally set a maximum frame size for Jumbo frames that will support 
values from 1518 bytes to 9216 bytes for untagged frames. 

Syntax:

vlan < 

vid

 > jumbo

[ no ] vlan 

< vid > 

jumbo

Configures the specified VLAN to allow jumbo frames on all 
ports on the switch that belong to that VLAN.  If the VLAN is 
not already configured on the switch, 

vlan 

< vid >

 jumbo

 also 

creates the VLAN.  Note that a port belonging to one jumbo 
VLAN can receive jumbo frames through any other VLAN 
statically configured on the switch, regardless of whether the 
other VLAN is enabled for jumbo frames. The 

[no]

 form of the 

command disables inbound jumbo traffic on all ports in the 
specified VLAN that do not also belong to another VLAN that 
is enabled for jumbo traffic. In a VLAN context, the command 
forms are 

jumbo

 and 

no jumbo

. (Default: Jumbos disabled on 

the specified VLAN.)

Syntax:

jumbo max-frame-size <size>

Sets the maximum frame size for Jumbo frames. The range 
is from 1518 bytes to 9216 bytes.

Note:

 The jumbo 

max-frame-size

 is set on a 

GLOBAL

 level. 

Default

: 9216 bytes

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 32  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments