manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 228 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 228

10-10

Port Status and Configuration     

Viewing Port Status and Configuring Port Parameters

Figure 10-6 shows sample output from the 

show tech transceivers

 command.

Figure 10-6.  Example of Show Tech Transceivers Command

Operating Notes:

■

The following information is displayed for each installed transceiver:

•

Port number on which transceiver is installed.

•

Type of transceiver.

•

Product number—Includes revision letter, such as A, B, or C. If no 
revision letter follows a product number, this means that no revision 
is available for the transceiver.

•

Part number—Allows you to determine the manufacturer for a spec-
ified transceiver and revision number. 

■

For a non-ProCurve installed transceiver (see line 23 Figure 10-6), no 
transceiver type, product number, or part information is displayed. In the 
Serial Number field, 

non-operational

 is displayed instead of a serial num-

ber.

■

The following error messages may be displayed for a non-operational 
transceiver:

•

Unsupported Transceiver. (SelfTest Err#060)
Check: www.hp.com/rnd/device_help/2_inform for 
more info.

ProCurve# show tech transceivers

Transceiver Technical Information:
 Port # |   Type    | Prod # | Serial #         | Part #
 -------+-----------+--------+------------------+----------
 21     | 1000SX    | J4858B | CN605MP23K       | 
 22     | 1000LX    | J4859C | H117E7X          | 2157-2345
 23     | ??        | ??     | non operational  |
 25     | 10GbE-CX4 | J8440A | US509RU079       | 
 26     | 10GbE-CX4 | J8440A | US540RU002       | 
 27     | 10GbE-LR  | J8437B | PPA02-2904:0017  | 2157-2345
 28     | 10GbE-SR  | J8436B | 01591602         | 2158-1000
 29     | 10GbE-ER  | J8438A | PPA03-2905:0001  | 
 
The following transceivers may not function correctly:
 Port #          Message
 --------        -------------------------------------
 Port 23         Self test failure.

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 10  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments