ProCurve 3500yl Series, Management And Configuration Manual, Page: 198 / 732

9-6
Time Protocols
SNTP: Viewing, Selecting, and Configuring
Figure 9-1. The System Information Screen (Default Values)
2. Press
[E]
(for
Edit
). The cursor moves to the
System Name
field.
3. Use
[v]
to move the cursor to the
Time Sync Method
field.
4. Use the Space bar to select
SNTP
, then press
[v]
once to display and move
to the
SNTP Mode
field.
5. Do one of the following:
• Use the Space bar to select the Broadcast mode, then press
[v]
to
move the cursor to the
Poll Interval
field, and go to step 6. (For
Broadcast mode details, refer to “SNTP Operating Modes” on
page 9-2.)
Figure 9-2. Time Configuration Fields for SNTP with Broadcast Mode
• Use the Space bar to select the
Unicast
mode, then do the
following:
i. Press
[>]
to move the cursor to the
Server Address
field.
ii. Enter the IP address of the SNTP server you want the switch to
use for time synchronization.
==========================- CONSOLE - MANAGER MODE -========================
Switch Configuration - System Information
System Name : ProCurve
System Contact :
System Location :
Inactivity Timeout (min) [0] : 0 MAC Age Time (sec) [300] : 300
Inbound Telnet Enabled [Yes] : Yes Web Agent Enabled [Yes] : Yes
Time Sync Method [None] : TIMEP
TimeP Mode [Disabled] : Disabled Server Address :
Tftp-enable [Yes] : Yes Jumbo Max Frame Size [9216] : 9216
Time Zone [0] : 0 Jumbo IP MTU [9198] : 9198
Daylight Time Rule [None] : None
Actions-> Cancel Edit Save Help
Time Protocol Selection Parameter
– TIMEP
– SNTP
– None
Time Sync Method [None] : SNTP
SNTP Mode [Disabled] : Broadcast
Poll Interval (sec) [720] : 720
Tftp-enable [Yes] : Yes
Time Zone [0] : 0
Daylight Time Rule [None] : None
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 6 Monday, January 28, 2008 10:04 AM