ProCurve 3500yl Series Management And Configuration Manual Download Page 220

Page: 220 / 732

10-2

This chapter describes how to view the current port configuration and how
to configure ports to non-default settings, including

■

Enable/Disable

■

Mode (speed and duplex)

Uni-directional Link Detection (UDLD)

Viewing Port Status and Configuring Port
Parameters

Port Status and Configuration Feature

Note On Connecting
Transceivers to
Fixed-Configuration
Devices

If the switch either fails to show a link between an installed transceiver and
another device, or demonstrates errors or other unexpected behavior on the
link, check the port configuration on both devices for a speed and/or duplex
(mode) mismatch.

■

To check the mode setting for a port on the switch, use either the Port
Status screen in the menu interface (page 10-5) or

show interfaces brief

the CLI (page 10-7).

To display information about the transceivers installed on a switch, enter the

show tech receivers

command in the CLI (page 10-10).

viewing transceiver status

Refer to Table
10-1 on pages
10-3 thru 10-4

page 10-6

page 10-11

page 10-18

configuring ProCurve auto-mdix

page 9-11

3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 2 Monday, January 28, 2008 10:04 AM

Summary of Contents for 3500yl Series




























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 3500yl Series

Reviews:

ProCurve 3500yl Series, Management And Configuration Manual, Page: 220 / 732

Search results

Summary of Contents for 3500yl Series

Reviews: