manualshive.com logo in svg

ProCurve 3500yl Series, Management And Configuration Manual, Page: 651 / 732

Share
Download
ProCurve 3500yl Series Management And Configuration Manual Download Page 651

C-43

Troubleshooting

Debug/Syslog Operation

Using the Debug/Syslog feature, you can perform the following operations:

■

Configure the switch to send Event Log messages to one or more Syslog 
servers. In addition, you can configure the messages to be sent to the User 
log facility (default) or to another log facility on configured Syslog servers.

N o t e

As of December 2005, the 

logging

 

facility 

< 

facility-name

 >

 option (described on 

page C-55) is supported on the following switch models:

■

Series 6400cl switches

■

6200yl Switch

■

Series 5400zl switches

■

Series 5300xl switches

■

Series 4200vl switches

■

Series 4100gl switches (software release G.07.50 or greater)

■

Series 3500yl switches

■

Series 3400cl switches

■

Series 2800 switches

■

Series 2600 switches and the Switch 6108 (software release H.07.30 or 
greater)

For the latest feature information on ProCurve switches, visit the ProCurve 
Networking web site and check the latest release notes for the switch products 
you use.

■

Configure the switch to send Event Log messages to the current manage-
ment-access session (serial-connect CLI, Telnet CLI, or SSH).

■

Disable all Syslog debug logging while retaining the Syslog addresses from 
the switch configuration. This allows you to configure Syslog messaging 
and then disable and re-enable it as needed.

■

Display the current debug configuration. If Syslog logging is currently 
active, the list f configured Syslog servers is displayed.

■

Display the current Syslog server list when Syslog logging is disabled.

3500-5400-6200-8200-MCG-Jan08-K_13_01.book  Page 43  Monday, January 28, 2008  10:04 AM

Summary of Contents for 3500yl Series





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments