11-27
Power Over Ethernet (PoE) Operation
Viewing PoE Configuration and Status
For example,
show power-over-ethernet brief
displays this output:
Figure 11-7. Example of Show Power-Over-Ethernet Brief Output
You can also show the PoE information by slot:
Figure 11-8. Showing the PoE Information by Slot
ProCurve(config)# show power-over-ethernet brief
Status and Counters - Port Power Status
PoE | Power LLDP Power Alloc PoE Configured Detection Power
Port | Enable Detect Priority By Val Type Status Class
----- + ------- -------- --------- ----- ---- ----------- ----------- ------
A1 | Yes enabled low usage 5 Phone-1 Delivering 0
A2 | Yes disabled low usage 17 Searching 1
A3 | Yes disabled low usage 17 Searching 0
A4 | Yes disabled low usage 17 Searching 2
A5 | Yes disabled low usage 17 Searching 0
A6 | Yes disabled low value 17 Searching 0
A7 | Yes disabled low value 17 Searching 0
A8 | Yes disabled low value 17 Searching 0
ProCurve(config)# show power-over-ethernet slot A
Status and Counters - System Power Status for slot A
Maximum Power : 273 W Operational Status : On
Power In Use : 0 W +/- 6 W Usage Threshold (%) : 80
3500-5400-6200-8200-MCG-Jan08-K_13_01.book Page 27 Monday, January 28, 2008 10:04 AM