EFX 885, 835, 825
Service Manual 20039-166
Page 32
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
11.
Route the black, round Ethernet cable through the opening in the upper right side of the armor, behind the tuner
and connect the Ethernet cable to the upper RJ45 type connector.
See Diagram 3.12.10.
12.
Route the grey, flat Data cable through the opening in the upper right side of the armor, behind the tuner and
connect the Data cable to the lower RJ45 type connector.
See Diagram 3.12.11.
Diagram 3.12.10
Diagram 3.12.11
13.
Route the Power cable through the upper left corner of the weldment and connect it to the P80 power
connector.
See Diagram 3.12.12
.
Note:
Leave the connector on the side of the P80 as shown in
diagram 3.12.12
,
as it might be necessary to access it for troubleshooting.
Diagram 3.12.12
14.
Route the Heart Rate cable through the upper left corner of the weldment and connect it to the HR PCA. Route
any excess Heart Rate cable into the rectangular center section of the dash assembly.
See Diagram 3.12.13
Power Connectors
Lower RJ45
Connector
Upper RJ45
Connector
Ethernet
Cable
Data Cable
Summary of Contents for EFX 825
Page 15: ......
