Precor EFX 825, Service Manual

Page: 8 / 171

EFX 885, 835, 825
Service Manual 20039-166
Page 8
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 3.2 P80 About
1. Refer to Procedure 3.1 Settings, to access the About menus.
2. About settings provide basic information including equipment models and serial numbers. Most of these
settings are for informational purposes only and cannot be modified.
See About Table . To select a About
item, touch on an item in the About menu.
About
Menu Item Descriptions Navigation Configure/View/Test
Event Log Provides a list of the most recent
hardware and software events, and
equipment status. If no events have
occurred since the last time the
event log was cleared, the event log
screen will be empty.
Touch Event Log
Details of the Event will be listed.
Touch REFRESH to update the list
in the log.
Touch SAVE to save the log to a
Flash drive device.
Touch

BACK to About
Event Count Number of events recorded by
equipment over its lifetime.
None
None
Console Serial Number Set by Precor and stored in the
console's memory.
None None
Lower Serial Number Stored in the console's memory.
Note: This information is not
currently available to be displayed.
None
None
Location Entered on console at the time of
registration.
Touch Location
Displays location information.
Touch

BACK to About
Release Bundle Version Shows current version of software.
Automatically updates as part of
each software upgrade.
Touch Release
Bundle Version
Displays detailed information about
the current software.
Touch

BACK to About
Etag Check Interval: Determines how often the console
will check for updates.
None None
Heartbeat Interval Determines how often the console
communicates with the Server.
None None
Minimum Heartbeat
Interval Minimum amount of time between
heartbeats to the Preva server.
None None
Maximum Heart beat
Interval Maximum amount of time between
heartbeats to the Preva server.
None None
Mfe MAC Address Stored in the consoles memory. Set
at factory
None None
Network Time Server 1 These addresses are set at the
factory and will not need to be
changed in the field.
None None
Network Time Server 2 These addresses are set at the
factory and cannot be changed in
the field.
None None
Network Time Server 3 These addresses are set at the
factory and cannot be changed in
the field.
None None
Machine Type Type of equipment (AMT, RBK,
UBK, EFX, & TRM). Set at factory.
None None
3. Touch

BACK to Settings. Procedure 3.1.