Precor EFX 825, Service Manual

Page: 25 / 171

EFX 885, 835, 825
Service Manual 20039-166
Page 25
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 3.11 P80 Manage Settings (Cloning)
The only P80 console settings that can be imported and exported through a USB Flash Drive device at this time are:
Settings that Can Be Cloned
Menu Settings
Display

Measurement of Units

Standby Mode Delay

Time Zone

Closed Captioning

Language
Workout Limits

Maximum Workout Duration

Maximum Pause Time

Summary Time Out

Resistance Range (RBK, UBK only)

Speed Limit (TRM only)

Incline Limit (TRM only)

Auto Stop (TRM only)

CrossRamp Auto Level (EFX only)
TV Settings

Channel Guide

Region

Default Channel

Skip Unnamed Channels
Network Settings

Primary DNS Manual only

Secondary DNS Manual only

Gateway Manual only

Netmask Manual only
Connectivity

Network Type

Preva Server Address
The following procedure will explain how to save existing P80 console settings onto a USB Flash Drive and then
import the saved settings into another P80 console.
Note: Settings from one P80 console will need to be configured manually and imported to a flash drive
device before cloning and exporting to additional P80 consoles
.
Procedure
1. The Welcome screen will be the first screen you see when you approach the P80 console. Press the Pause key
and continue holding it down while you double press (
prior to 1.1 version software release ) or single press ( 1.1
version or after software release ) in sequential order an X configuration on the Volume and Channel key pad (

Channel Up,

Volume Down,

Volume Up,

Channel Down). See Diagram 3.1.1. Release the Pause key when
done pressing the arrows. Note: The keypad X configuration sequence should be not faster than 1 second
between each key stroke. Any speed faster than 1 second may result in an unsuccessful access to the sign-in
screen.