EFX 885, 835, 825
Service Manual 20039-166
Page 13
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 3.6 P80 Systems Tests
1.
Refer to Procedure 3.1 Settings, to access the Equipment Usage menus.
2.
The systems tests allow you to check specific functions of the equipment.
3.
To select a
Systems Test
touch on an item in the
Systems Test
menu.
Systems Tests
Test
Equipment
Description
Auto Stop Test
TRM Only
1.
Touch
Auto Stop Test
, then Touch
START
.
2.
The Auto stop test will start the belt at 1 mph; count will be reset to 0, and then
count up with each step.
3.
Touch
STOP
to end the test. Touch
BACK
to exit to Systems Test.
Belt Speed Test
TRM Only
1.
Touch
Belt Speed Test
, then Touch
START
.
2.
The belt will start a 0.5 mph, using the machine control paddle to increase by 0.1
mph increments. The console will display motor current as the belt speed
increases or decreases.
3.
Touch
STOP
to end the test. Touch
BACK
to exit to Systems Test.
Incline Test
TRM Only
1.
Touch
Incline Test
, and then Touch
START
.
2.
Use the machine control paddle to change the lift. The console will display the
analog to digital (A/D) incline position number and the incline position in
percent of incline.
3.
Touch
STOP
to end the test. Touch
BACK
to exit to Systems Test.
AMT Stride Position Test
AMT Only
1.
Touch
AMT Stride Position Test
and then Touch
START
.
2.
The High, Low and Dynamic positions will be displayed. The low position display
shows the lowest position reading achieved during the test. The high position
display shows the highest position reading achieved during the test. The
dynamic position display changes with current stride position. Stride on the
AMT to the maximum horizontal movement in both directions. At maximum
stride length the low stride display should read 0 and the high stride display
should read 40.
3.
Touch
STOP
to end the test. Touch
BACK
to exit to System Tests.
Brake Test
AMT, RBK,
UBK, EFX
1.
Touch
Brake Test
, then Touch
START
.
2.
Use the machine control paddle to change the resistance up and down. The
resistance changes will be displayed in power bits.
3.
Touch
STOP
to end the test. Touch
BACK
to Systems Test.
Summary of Contents for EFX 825
Page 15: ......
