Precor EFX 825, Service Manual

Page: 29 / 171

EFX 885, 835, 825
Service Manual 20039-166
Page 29
©2011 Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Procedure 3.12 P80 Replacing the Console
Required Tools

2- 7/16 in open end wrenches

¹/ ₄ -inch hex wrench

SAE ⁵ / ₃₂ -inch hex wrench

SAE¹/
₂
-inch box-end wrench

#2 Phillips screwdriver

Wire cutter
Procedure
1. Remove the rear vent cover. Do not use a sharp tool, such as a flat bladed screwdriver, to pry up the cover, as
you can damage the covers and possibly components inside the console. When the cover starts to come loose,
gently unsnap it from the P80 and set it aside where it will not be scratched.
See Diagram 3.12.1
Diagram 3.12.1
2. Remove the four flat head 5/8 inch long screws that secure the console to the plate. See Diagram 3.12.2
Diagram 3.12.2
Rear Vent Cover
EFX 885 EFX 883