Maintaining the pneumatic tool
48
Heavy fouling
Wipe off the pneumatic tool housing with a cloth that has been
slightly dampened with a mild soap solution.
Then wipe the housing with a cloth that has been slightly
dampened with tap water.
Wipe off the pneumatic tool with a dry soft cloth.
Oil all metal parts of the pneumatic tool with a thin application of
PREBENA special nailer oil.
Lubricating the pneumatic tool
CAUTION
Inadequate lubrication or using the wrong
lubricant can damage the pneumatic tool.
Only use PREBENA special nailer oil,
Use a compressed air supply with
sufficient added oil, or add lubricating oil at
the compressed air connection.
If an oiler is not mounted, and the length of the air line is over
10 m, then adequate lubrication is not ensured.
If you only operate the pneumatic tool with compressed air
cartridges, then the pneumatic tool cannot be sufficiently oiled
via the compressed air.
In these two cases add two to five drops of PREBENA special
nailer oil directly into the connection for the compressed air
source daily before starting operation.
