Operating the pneumatic tool
36
Pneumatic tool single shot
Proceed as follows for pneumatic tool single shot:
Set the selector switch to "T" (single shot) (see page 29).
Place the nose of the tool on the piece of wood and press the
pneumatic tool against the piece of wood.
Pull the trigger all the way through.
A nail will be driven into the piece of wood.
Release the trigger.
Lift the pneumatic tool off of the piece of wood.
Repeat these steps to drive another nail.
Pneumatic tool bump fire
Do not use the pneumatic tool in the "bump fire" setting in the
following situations
For types of implementation that require movement with the
pneumatic tool over scaffolding, stair, ladders, or ladder-like
structures.
For closing crates or bins and
To attach transport safeguards
In these cases place the selector switch on "T" (single shot).
