Preparing the pneumatic tool
23
CAUTION
Operation on compressed air systems that do
not satisfy the above requirements can result
in damage to the pneumatic tool.
Only operate the pneumatic tool on
suitable compressed air systems.
Check the status of the pneumatic tool (see page 17).
Remove the plug from the compressed air hose connection.
Check the connection for the compressed air hose to ensure that
it is free of foreign objects and fouling, and clean the connection if
necessary.
Set the pressure regulator of the compressed air system for an
operating pressure that does not exceed 8.3 bar.
Set the pneumatic tool's operating pressure for the lowest
operating pressure with which the pneumatic tool functions
trouble-free.
WARNING
Inadvertent release when connecting to the
compressed air supply can result in severe or
fatal injuries.
Do not point the pneumatic tool at people
or animals.
Empty the magazine before connecting.
