After operation
41
Emptying the magazine
Due to the lock-out safety device the magazine will never empty
completely. Consequently you must remove the unused nails from
the magazine, if you are no longer using the pneumatic tool.
Proceed as follows for this.
WARNING
Inadvertent release when emptying the
magazine can result in severe or fatal injuries.
Disconnect the pneumatic tool from the
compressed air supply.
CAUTION
A crushing hazard is posed by the spring-
loaded pusher.
Hold the pusher firmly and allow it to slowly
slide forward.
Pull the pusher back a slight distance (1.).
Press the catch on the pusher (2.) and keep the catch depressed.
1.
2.
