Preparing the pneumatic tool
25
The maximum permissible pressure of the pneumatic tool is 8.3 bar.
If the compressed air system supplies too much pressure and the
safety valve for the operating pressure is defective, then the
maximum operating pressure can be exceeded. In this case the
pointer in the manometer for the operating pressure will be in the red
area.
WARNING
There is an explosion hazard if the maximum
operating pressure is exceeded.
In this case immediately disconnect the
compressed air hose from the pneumatic
tool.
Filling the magazine
WARNING
Inadvertent release when filling the magazine
can result in serious or fatal injuries.
Do not point the pneumatic tool at people
or animals.
CAUTION
The wrong nails can result in injuries, impair
trouble-free function of the pneumatic tool, or
damage the pneumatic tool.
Only use the PREBENA nails specified in
the section "Ordering accessories ".
