Troubleshooting
51
Symptom
Possible cause:
Remedy
Excessive operating
pressure (air audibly
escapes at the safety
valve for operation with
the compressed air
cartridge).
Pneumatic tool
damaged or excessive
pressure in the
compressed air
cartridge.
Disconnect the cartridge
from the pneumatic tool
(see page 19).
Attach cartridge with the
correct operating
pressure (see page 19).
If the problem persists
Disconnect the cartridge
from the pneumatic too.
Notify customer service
(see page 19).
Excessive operating
pressure (air audibly
escapes at the safety
valve for operation with
the compressed air
cartridge).
Operating pressure
has been set too high
or pneumatic tool is
damaged.
Reduce operating
pressure (see page 31).
If the problem persists
Immediately disconnect
the pneumatic tool from
the compressed air hose
(see page 40).
Notify customer service
(see page 31).
Nails are not driven in
completely.
Insufficient operating
pressure.
Increase operating
pressure (see page 31).
The pressure in the
compressed air
cartridge is too low.
Change the compressed
air cartridge
(see page 19).
The safety device is
set incorrectly.
Adjust the safety device
see page 33).
The nailer tip on the
pneumatic tool is worn.
Notify customer service
(see page 58).
