manualshive.com logo in svg

Potterton Paramount four, Installation Manual, Page: 56 / 144

Share
Download
Potterton Paramount four Installation Manual Download Page 56

For more information, see

Total dynamic head Paramount four, page 17

8.12  Emergency mode (Manual control)

Activation of manual control. If the manual control function is activated the 

boiler is controlled to the setpoint manual control. All the pumps are 

switched on. Additional requests e.g. for heating domestic water are ignor­

ed.

1. Press OK.

2. Request the menu item Maintenance.

3. Press OK.

4. Request the parameter Manual control (prog. no. 7140).

5. Press OK.

6. Select the parameter On.

7. Press OK.

8. Leave the programming level by pressing the operating mode key 

for heating mode.

8.13  Chimney sweep function

The chimney sweep function is activated or deactivated using the chimney 

sweep key.

1. Press the chimney sweep key  . 

The activated special function is displayed by the symbol   in the 

display.

Note

If there is demand for heat from a coiled tubing storage tank, this 

demand will continue to be met while the emissions test function 

(chimney sweep function) is running.

8  Operation

56

Paramount four 30 – 115 kW

7658013 - 02 - 15092016

Summary of Contents for Paramount four

















































































































































Reviews:

No comments