manualshive.com logo in svg

Potterton Paramount four, Installation Manual, Page: 51 / 144

Share
Download
Potterton Paramount four Installation Manual Download Page 51

8  Operation

8.1  Changing parameters

Settings which are not directly changed via the operating panel must be 

carried out on the setting level.

The basic programming process is depicted in the following using the ex­

ample of the setting of Set time and date.

1. Press OK. 

The 

End user

 display is shown.

Note

If parameters are to be changed on a level other than the end user 

level, please see the note below.

2. Use the control knob to select the menu item Set time and date. 

3. Press OK.

4. Use the control knob to select the menu item Hours / minutes. 

5. Press OK.

6. Carry out hour setting (e.g. 15 h) using the control knob. 

7. Press OK.

8. Carry out minute setting (e.g. 30 minutes) with the control knob. 

9. Press OK.

10. Leave the programming level by pressing the operating mode key 

for heating mode. 

Note

The previous menu item is retrieved by pressing the ESC key 

without applying previously modified values. If no settings are car­

ried out for approximately 8 minutes, the basic display is called up 

without applying previously modified values.

For more information, see

Programming procedure, page 51

8.2  Programming procedure

The selection of the setting levels and menu items is done as follows:

Time and date

Operator section

Time and date

Hours / minutes

Time and date

Hours / minutes

Time and date

Hours / minutes

xxxxxxxxxxxxxx

8  Operation

7658013 - 02 - 15092016

Paramount four 30 – 115 kW

51

Summary of Contents for Paramount four

















































































































































Reviews:

No comments