manualshive.com logo in svg

Pontiac 2000 Montana, Owner'S Manual

Share
Download
Pontiac 2000 Montana Owner'S Manual Download Page 71

1-59

Built

-

in Child Restraint (Option)

Bucket Seat

60/40 Bench Seat

If your vehicle has this option in a bucket seat, each
bucket seat that has the built

-

in child restraint fits in

only one location in your vehicle. To find out where a
bucket seat that has a built

-

in child restraint must be

located in your vehicle, see “Removable Rear Bucket
Seats” in the Index. If your vehicle has this option in 
a 60/40 bench seat, this bench seat will only fit in the
second row of your vehicle. In both types of seats, 
the built

-

in child restraint works the same way.

Summary of Contents for 2000 Montana













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands