manualshive.com logo in svg

Pontiac 2000 Montana, Owner'S Manual

Share
Download
Pontiac 2000 Montana Owner'S Manual Download Page 66

1-54

To make the belt shorter, pull its free end as shown until
the belt is snug.

Buckle, position and release it the same way as the lap
part of a lap

-

shoulder belt. If the belt isn’t long enough,

see “Safety Belt Extender” at the end of this section.

Make sure the release button on the buckle is positioned
so you would be able to unbuckle the safety belt quickly
if you ever had to.

Center Passenger Position 
(Bucket Seat)

Lap Belt

If your vehicle has bucket seats, someone can sit in the
center position bucket seat.

Summary of Contents for 2000 Montana













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands