Pontiac 2000 Montana Owner'S Manual Download Page 355

Page: 355 / 428

6-34

Front Turn Signal/Parking Lamps

1. Open the hood.

2. Remove the thumb screw attaching the parking/turn

signal lamp assembly to the headlamp assembly.

3. Pull the parking/turn signal lamp assembly away

from the vehicle.

4. Unscrew the bulb socket from the lamp assembly by

pressing the tab while turning counterclockwise.

5. Replace the bulb by pulling the old one out and

gently pushing the new one into the lamp socket.

6. Line up the tabs on the socket with the gaps in the

socket holes and screw the bulb socket back into the
lamp housing until a click is heard (the tab popping
back out).

Summary of Contents for 2000 Montana












































































































































































































































































































































































































































Search results

Summary of Contents for 2000 Montana

Reviews:

Brands by name

Popular brands

Pontiac 2000 Montana, Owner'S Manual

Search results

Summary of Contents for 2000 Montana

Reviews:

Brands by name

Popular brands