manualshive.com logo in svg

Pontiac 2000 Montana, Owner'S Manual

Share
Download
Pontiac 2000 Montana Owner'S Manual Download Page 179

2-76

Side Convenience Nets

The side convenience nets are designed to hold smaller
items (about 8 lbs. (4 kg.)) than the large convenience
net. Attach the loops to the posts on the rear side panels,
near the jack storage area.

When not in use, it is recommend that you take down
the convenience nets to extend their life and retain 
their elasticity.

Front Seat Storage Net

There is a storage net that stretches between the front
seats. Pull the hooks towards the passenger’s seat and
insert them into the holes next to the cupholder.

To store the net, lift the hooks up and out of the holes.
The net does not detach from the driver’s seat.

When not in use, it is recommend that you unhook the
net to extend its life and retain its elasticity.

Summary of Contents for 2000 Montana













































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands