Polycom SoundPoint IP 650 User Manual Download Page 95

Page: 95 / 136

Customizing Your Phone

5 - 5

To increase or decrease the maximum backlight intensity on the phone’s

display, press the

Down

soft keys.

To increase or decrease the maximum backlight intensity on the expansion

module, press the

Down

soft keys on the expansion module.

The backlight intensities for the On and Idle modes, as well as the

backlight intensities between each expansion module and the phone’s

screen are shown relative to these values.

Press the

soft key to accept your changes.

10.

Press

to return to the idle screen.

Changing the Backlight Timeout

You can change the length of time your phone is idle before the backlight

changes to the Backlight Idle Intensity.

To change the backlight timeout:

Press .

Select

Settings > Basic > Backlight Timeout

From the Backlight Timeout screen, scroll to the timeout you want, then

press the

Select

soft key.

The default timeout is 40 seconds.

Press

to return to the idle screen.

Enabling Headset Memory Mode

This feature allows you to answer your phone from your headset if you are

using one.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands