Polycom SoundPoint IP 650 User Manual Download Page 57

Page: 57 / 136

Using the Advanced Features of Your Phone

3 - 7

Press

to return to the idle screen.

Integrating With Microsoft Live Communications Server 2005

Your system administrator can configure your phone to work with Microsoft

Live Communications Server 2005 and communicate with others using

Microsoft Office Communicator and Windows Messenger. From your phone,

you can invite, join, control, and monitor integrated multipoint audio and

video conferences.
Any contacts you add through your buddy list will appear as contacts in

Microsoft Office Communicator and Windows Messenger. Any contacts you

add in Microsoft Office Communicator and Windows Messenger will appear

in your buddy list.
To view and change your presence, refer to

Updating Your Presence Settings

on page

3-5

For more information, contact your system administrator.

To add a contact to your buddy list:

Press .

Select

Features > Presence > Buddy Status

Press the

More

soft key.

Press the

Add

soft key.

Enter the number of the contact.

Press the

Submit

soft key.

Press

to return to the idle screen.

To view and change your privacy list:

Press

Select

Features > Presence > Buddy Status > Privacy List

Scroll through the list to find the contact.

Press the

Edit

soft key.

Scroll down to the Access field.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands