Polycom SoundPoint IP 650 User Manual Download Page 67

Page: 67 / 136

Using the Advanced Features of Your Phone

3 - 17

Playing Back Recorded Calls

To playback a call:

Follow the steps above to open the desired recording.

The filename you selected appears on the graphic display. The length of

the file (in hours, minutes, and seconds) and the size of the file also appear.

Press the

Play

soft key.

“Playing” appears on the graphic display. The position indicator (in

hours, minutes, and seconds) above the progress bar changes as the file

plays back in real time.
(Optional.) Press the

Pause

soft key to pause the file playback.

(Optional.) Press the Resume soft key to resume playback of the file.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands