Polycom SoundPoint IP 650 User Manual Download Page 45

Page: 45 / 136

Using the Basic Features of Your Phone

2 - 27

—

Press the

New Call

soft key. From the Place an Authorized Call screen,

select the number you want to call, and then press the

Dial

soft key.

The following screen shows an example of the Place an Authorized

Call screen. Note that the three speed dial keys no the left are greyed

out because they are all unauthorized numbers.

—

Place a call to an authorized number by using the handset, headset or

speakerphone. For information on using the handset, headset or

speakerphone to place a call, see

Placing Calls

on page

2-2

The call is placed.

To answer a call on a locked phone:

While the phone rings, press the

Answer

key.

From the Answer the Call screen, enter your password, and then press

the

Enter

soft key.

(If you press the

Cancel

soft key instead, the Answer the Call screen

disappears and the incoming call window displays again).
(For information on your user password, including what to do if your

forget it, see

About Your User Password

on page

2-25

The call connects.

Logging Into Phones

If your system administrator has set up the User Login feature, you can view

your personal phone settings from any phone in the organization. This means

you can access your contact directory and speed dials, as well as other phone

settings, even as you temporarily change work areas.
If you change any settings while you’re logged in to a phone, the settings are

saved and displayed the next time you log in to a phone. When you log out,

your personal phone settings no longer display.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands