Polycom SoundPoint IP 650 User Manual Download Page 28

Page: 28 / 136

User Guide for the SoundPoint IP 650 Desktop Phone

2 - 10

Press

the

Confrnc

soft key to create a new call.

The active call is placed on hold.

Call the second party.

When the second party answers, press

or the

Confrnc

soft

key again to join all parties in the conference.

Press

the

Confrnc

soft key to add another party to the

conference.
The first and second party are put on hold.

Call the third party.

After the third party answers, press

or the press the

More

soft key followed by the

Confrnc

soft key to join all parties in the

conference.

Note

If configured for single key-press conferences, all conference participants hear the
dial tone and ringback when the conference host places a call to a new party.

Note

If configured for single key-press conferences, you do not need to press the

Confrnc

soft key again.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands