Polycom SoundPoint IP 650 User Manual Download Page 125

Page: 125 / 136

Troubleshooting Your Phone

6 - 7

Productivity Suite

Testing Phone Hardware

Your system administrator may ask you to access a diagnostics menu on your

phone to test your phone hardware. From the diagnostics menu, you can test

your phone’s microphones, speaker, handset, third-party headset (if present),

keypad mappings, and color LCD display. See your system administrator for

instructions on how to perform these tests.

To test your phone hardware:

Press

, and then select

Status

Diagnostics

Test Hardware

Audio Diagnostics

Keypad Diagnostics

, or

Display Diagnostics

Symptom

Problem

Corrective Action

You are trying to access one of
the following features, but it is not
available on your phone:

•

Corporate Directory

•

Recording and Playback of
Audio Calls

•

Managing Conferences

The license is not installed on
your phone or it has expired.

Do the following:

•

Press the

Menu

key, then select

Status > Licenses

•

Using the arrow keys, verify that the
features that you want to use has a
valid license.

•

Contact your system administrator.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands