Polycom SoundPoint IP 650 User Manual Download Page 26

Page: 26 / 136

User Guide for the SoundPoint IP 650 Desktop Phone

2 - 8

Placing Calls on Hold

During a call, press

or the

Hold

soft key. The hold icon will display on

the line key label.

Press

again or the

Resume

soft key to retrieve the call. The registered

line icon appears as the line indicator.

Multiple Calls on Hold

If multiple calls are on hold on a single Line Key, use

and

to switch

between the calls, and then press the

Resume

soft key to retrieve the desired

call.

If more than two calls are on hold on a single Line Key, an indication appears

on the graphic display, for example “2/3”, indicating that this is the second

call out of three calls.
If calls are on hold on more than one Line Key, you can view the details of the

calls on any Line Key by pressing and holding the Line Key for more than two

seconds. If a Line Key is depressed for less than one second, the first call on

hold on that Line Key will be retrieved.

Note

The Hold feature typically generates music or a beeping tone. Therefore, avoid
putting a conference call on hold. Use the mute button instead.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands