Polycom SoundPoint IP 650 User Manual Download Page 11

Page: 11 / 136

Getting Started with Your Phone

1 - 3

Feature Keys:

Allow you to quickly access important features
with a single press.

Microphone Mute

Mutes audio transmission locally during calls
and conferences.

Headset

Allows you to place and receive calls through
an optionally connected headset.

Speakerphone

Allows for hands-free communication during
calls.

Hands-free Microphone

Picks up audio during hands-free calls. Place
your phone on a hard, flat surface for best
results.

Volume Keys

Adjusts the volume of the handset, headset,
speaker, and ringer.

Dial Pad

Provides the 10 digits, the alphabetic
characters, and special characters available in
context-sensitive applications.

Hold

Holds an active call or resumes a held call.

Speaker

For ringer and hands-free audio output.

Soft Keys

These keys are automatically labeled to identify
their context-sensitive functions.

Item

Description

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands