Polycom SoundPoint IP 650 User Manual Download Page 38

Page: 38 / 136

User Guide for the SoundPoint IP 650 Desktop Phone

2 - 20

To disable call forwarding:

From the idle screen, press the

Forward

soft key.

If multiple lines are configured on your phone, select the line to forward
from the list using

and

Scroll to highlight the forwarding type you want to disable and then

press the

Select

soft key.

Press the

Disable

soft key.

The idle screen returns, the regular icon appears as the line indicator.

Dynamic Forwarding

To forward an incoming call to another party:

When the phone rings, press the

Forward

soft key.

Enter a number to forward the incoming call to.

Press the

Enable

soft key.

The incoming call is forwarded to the other party. If call forwarding is

disabled, all future calls will not be forwarded and forwarding will remain

disabled.

Enabling Do Not Disturb

To prevent the phone ringing (from incoming calls), you can select Do Not

Disturb.

Note

This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands