Polycom SoundPoint IP 650 User Manual Download Page 108

Page: 108 / 136

User Guide for the SoundPoint IP 650 Desktop Phone

5 - 18

Enter first and/or last name of the contact from the keypad.
Use the

1/A/a

soft key to select between numeric and upper/lower case

alphanumeric modes.
Use the

Encoding

soft key to access special characters in other languages.

Enter a contact number.
This is a required field and it must be unique (not already in the directory).

(Optional.) Change the Speed Dial Index.
It is automatically assigned to the next available index value. You may

instead enter any unused speed dial number from 1 to 9999.
For more information, refer to

Assigning Speed Dial Keys

on page

2-21

(Optional.) Change the Ring Type and Divert Contact.
These fields may be left blank.
For more information on setting the Ring Type field, refer to

Distinguishing Calls

on page

5-25

For more information on diverting contacts, refer to

Diverting Calls

page

5-27

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands