Polycom SoundPoint IP 650 User Manual Download Page 58

Page: 58 / 136

User Guide for the SoundPoint IP 650 Desktop Phone

3 - 8

For Access, toggle to select Enabled.
When enabled, you are allowing the contact to see your presence.

When disabled (default), you are not allowing the contact to see your

presence.

Press

to return to the idle screen.

Integrating With Microsoft Lync Server 2010

Your system administrator can configure your phone to work with Microsoft

Lync Server 2010 and communicate with others using Microsoft Lync. From

your phone, you can invite, join, control, and monitor integrated multipoint

audio and video conferences.
Any contacts added through your buddy status list will appear as a contact in

Microsoft Lync. Any contacts added as a contact in Microsoft Lync will appear

in your buddy status list.
To view and change your presence, see

Updating Your Presence Settings

page

3-5

. For more information on integrating with Microsoft Lync Server

2010, contact your system administrator.

Adding Buddies

To add a contact to your buddy list:

Do one of the following:

Press

, and select

Features > Presence > Buddy Status

Press the

Buddies

soft key.

Do one of the following:

—

If the buddy list is empty, press the

Add

key.

—If the buddy list is not empty, press the

More

soft key, and then the

Add

soft key.

Enter the desired contact name and press the

Submit

soft key.

You can also delete a contact from your buddy list.
To place a call to a buddy, see the next section,

Calling Your Buddies

or the

Microsoft Lync documentation.

Note

Your login credentials will be set up by your system administrator so your phone is
authorized to communicate with Microsoft Lync Server 2010. If you have any issues
with your login credentials, refer to

Accessing Features with Your Login Credentials

on page

3-30

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands