Polycom SoundPoint IP 650 User Manual Download Page 81

Page: 81 / 136

Using the Advanced Features of Your Phone

3 - 31

To re-submit or enter your login credentials:

Press ,

then

select

Settings > Basic> Login Credentials

The Login Credentials Domain screen displays.

Enter the domain, user name, and password, then press the

Submit

soft

key.

Updating Your Phone’s Configuration

Your phone can often accept a new configuration without requiring a restart.

To update the phone’s configuration:

Press

Select

Settings > Basic > Update Configuration

“Are you sure?” appears on the screen.

If you still want to update the configuration, press the

Yes

soft key.

The configuration is updated. On occasion, your phone may restart

depending on which configuration parameters have changed.

If the phone did not restart, press

to return to the idle screen.

Restarting Your Phone

In rare cases, your system administrator may ask you to restart your phone to

assist in troubleshooting. It is sometimes possible to restore normal operation

to a malfunctioning phone without restarting it. Your system administrator

may want to perform diagnostics on the phone before restarting it, contact

them before restarting the phone and losing current status information.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands