Polycom SoundPoint IP 650 User Manual Download Page 21

Page: 21 / 136

Using the Basic Features of Your Phone

2 - 3

To place a call using the handset:

Do the following steps in any order:

—

Pick up the handset.

—

Dial the number using the dial pad.

To place a call using Hands-Free Speakerphone mode:

Do one of the following:

—

With the handset on-hook, press

, or the

New Call

soft key to obtain a dial tone.

Dial the number using the dial pad.

—

With the handset on-hook, dial the number using the dial pad.
Press ,

the

Dial

soft key.

Note

You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press the

Menu

key, and then select

Status > Platform > Phone

. The IP

address is listed together with other phone information. The maximum URL or IP
address length is 32 characters. For example, 10.3.0.42, sip:[email protected] .

Press the

URL

soft key and enter the URL or IP address. Use * for “.” and # for “@”.

Then press the

Send

soft key to complete the call.

Your phone may not support SIP URL or IP address dialing. Contact your system
administrator.

Note

If “Handsfree mode disabled” appears on the graphic display after you press the
speakerphone key

your system administrator has disabled the speakerphone on

your phone.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands