Polycom SoundPoint IP 650 User Manual Download Page 63

Page: 63 / 136

Using the Advanced Features of Your Phone

3 - 13

Press the

Record

soft key.

To start recording, press the

Start

soft key.

“*R*” appears on the graphic display while the phone records.
If you press the

Back

soft key, you can access the top-level soft keys (for

example,

Hold

EndCall

Trnsfer

, and

Confrnc

). You must navigate back

(using the

More

and

Record

soft keys) to again access the

Stop

and

Pause

soft keys.

Stop recording in one of the following ways:

—

Press the

Stop

soft key.

—

Hang-up or end the active call.

Recording Conferences

You can record conference calls in the same way as other calls with the

following exceptions:

•

All parties in a conference call are recorded. If one of the conference parties

presses

, they are not recorded.

•

When all parties in a conference call are put on hold together, recording is

paused. You can place or answer other calls, which will be recorded in the

same file. When the conference call is resumed, recording of the

conference resumes.

Summary of Contents for SoundPoint IP 650









































































































































Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands

Polycom SoundPoint IP 650, User Manual

Search results

Summary of Contents for SoundPoint IP 650

Reviews:

Related manuals for SoundPoint IP 650

Brands by name

Popular brands