Polycom MGC Manager User Manual Download Page 75

Page: 75 / 382

MGC Manager User’s Guide - VoicePlus Edition

2-47

Listing Reservations

The Reservations defined on the MCU are stored in the

Reservations

list.

To view the Reservations list in the Browser pane:

•

Expand the MCU tree, then expand the

Reservations

tree.

The reserved conferences are listed in the

Browser

pane below the

Reservations

icon.

The number of currently defined reservations appears between brackets
next to the

Reservations

icon. Each conference is identified by its name,

and an icon indicating the Reservation type and status.

You can view Reservations in the

Status

pane to check additional

information about the Reservation, such as its Numeric ID, passwords,
dial-in numbers and H.323 Network Service Prefix.

Displaying the List of Reservations in the Status Pane

•

Expand the MCU tree and in the Status pane and click the

Reservations

icon .

Summary of Contents for MGC Manager































































































































































































































































































































































































Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands

Polycom MGC Manager, User Manual

Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands