Polycom MGC Manager User Manual Download Page 338

Page: 338 / 382

Chapter 7 - Attended Conferencing

7-36

Performing Operations using the Right-Click Menu

Moving a Participant to the Operator Conference

To move a participant to the Operator conference from the On Going
Conferences list:

In the

Browser

Status,

Monitor

panes, display the list of participants

in the On Going Conference.

Right-click the icon of the participant to be moved to the Operator
conference, and then click

Attend

The participant is moved to the Operator conference while his/her icon
remains in the conference list and in the

Participants Queue

list. An

exclamation point appears next to the

Participant

icon in the

Name

column of all panes and in the conference tree.

In addition, the

Attended

icon

is displayed in the

Status

column of

the Participants List in the

Monitor

and

Status

panes.

Summary of Contents for MGC Manager































































































































































































































































































































































































Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands

Polycom MGC Manager, User Manual

Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands