Polycom MGC Manager User Manual Download Page 275

Page: 275 / 382

MGC Manager User’s Guide - VoicePlus Edition

6-35

For the list of all actions and their respective default DTMF codes, see
“Managing Conferences Using DTMF Codes” on page 4-62.

To print the DTMF codes data, see “Printing IVR/DTMF Codes” on
page 6-51.

27. Optional. In the

Name

field, click the function whose code you wish to

modify.
The appropriate DTMF code appears in the box below the list.

28. In the

DTMF Code

(left) field, enter the new code.

In the

Permission

(right) field, select whether this function may be used

by all conference participants or only the chairperson.

29. Click

Finish

to complete the IVR Service definition.

The new IVR Message Service is added to the

IVR Services

list.

Summary of Contents for MGC Manager































































































































































































































































































































































































Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands

Polycom MGC Manager, User Manual

Search results

Summary of Contents for MGC Manager

Reviews:

Related manuals for MGC Manager

Brands by name

Popular brands